Air Heater Dryer [Compatible with our blowers only]
The bouncy castle inflatable heater dryer is exclusive to Andy J. Leisure. This device attaches onto our 1HP, 1.5HP and 2HP blowers.
The heater plugs in seperately and generates heat which is then pushed through your inflatable to enhance drying times of inflatables.
Twist in & Out Method
We advise watching our video which can be found on this page
- Step 1: Click the heater into the fittings on the side of your AJL blower
- Step 2: Attach to blower tube of your inflatable
- Step 3: Turn the heater on ONLY and allow to heat for around 2 minutes
- Step 4: Turn on the blower to start pushing hot air through the inflatable
- Step 5: Open the zip or spare blower tube to allow damp air to exit the inflatable
- Step 1: Click deflator into place on the side of your blower
- Step 2: Turn off blower
- Step 3: Position blower inside DEFLATION ZIP not the blower tube and close the zip
- Step 4: Turn blower back on and let deflator extract the air
- 12 month warranty (subject to terms and conditions).
- UK Plug (can be converted to cform watertight plug)
- Certification: CE.
- Weight: 14.6kg.
- Voltage/Frequency: AC 220V/50Hz.
- Wattage (W): 1800
- Cord (m): 5.
- Flow (m3/h): 600
- Dimensions (mm): 450×385×485.
- Hard durable plastic shell.
- Optional inflate/deflate cone.
- Wattage (W): 2500
- Voltage: 220V
- Amperage: Requires a circuit of 10.4A